Table of Contents
Advertisement
Troubleshooting
Important: It is essential that all operator safety mechanisms be connected and in proper operating
condition prior to mower use.
The following table lists some of the common causes of trouble. If assistance is needed, contact your
Exmark Service Dealer.
Problem
Discharge gate does not open and/or close.
Handle is too loose or tight.
Possible Cause
1. Discharge gate is deformed.
2. Discharge gate is not adjusted properly.
3. Cable is disconnected at one or both ends.
1. Pivot bolt and nut not adjusted properly.
17
Troubleshooting
Corrective Action
1. Reshape the discharge gate.
2. Adjust the cable nuts and/or pivot gate.
3. Reconnect cable.
1. Adjust the bolt and nut for proper
resistance.
Advertisement
Table of Contents
