Advertisement
Quick Links
Turf Striper Kit
Pioneer S-Series 48, 52, and 60 Inch Decks
Kit No. 116-5297
For Serial Nos. 920,000 & Higher
This product contains a chemical or chemicals known to the State of California to
Loose Parts
Use the chart below to verify that all parts have been shipped.
Item Part No.
Description
1
109-6964
Roller-Striper
2
Asm-Bolt Bag
2:1
3231-2
Bolt, Carriage 3/8-16 x 1
2:2
104-8301
Nut, Nyloc 3/8-16 Flg
2:3
3234-11
Screw, HH FLG 3/8-16 x 1
*Not shown
© 2014—Exmark Mfg. Co., Inc.
Industrial Park Box 808
Beatrice, NE 68310
WARNING
CALIFORNIA
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Qty
1
1
8
8
4
www.Exmark.com
Item Part No.
Description
3
116-5147-01 Bracket-Mount RH
4
116-5148-01 Bracket-Mount LH
5
116-5149
Wld-Roller Shaft
6
116-5150
Wld-Plate Striper
7*
116-5298
Template-Drill
Figure 1
Original Instructions (EN)
Form No. 4500-900 Rev D
Installation Instructions
All Rights Reserved *4500-900* D
Printed in the USA
Qty
1
1
1
1
1
Advertisement
Related Manuals for Exmark 116-5297
Summary of Contents for Exmark 116-5297
- Page 1 Wld-Plate Striper 3234-11 Screw, HH FLG 3/8-16 x 1 116-5298 Template-Drill *Not shown Figure 1 © 2014—Exmark Mfg. Co., Inc. www.Exmark.com Original Instructions (EN) All Rights Reserved *4500-900* D Industrial Park Box 808 Printed in the USA Beatrice, NE 68310...
- Page 2 Safety Alert Symbol Installing the Turf Striper to the Deck This Safety Alert Symbol (Figure 2) is used both in this instruction sheet and on the machine to identify important 1. Make sure all moving parts have stopped, parking brake safety messages which must be followed to avoid accidents is engaged, and the key has been removed.
- Page 3 10. Tighten all hardware. Note: If the unit will be mowing at different heights, set the Turf Striper at the setting for the lowest cutting height that will be used. Figure 4 1. 4 inches & Higher (101.6 mm) 2. 3–4 inches (76.2–101.6 mm) 3.