Download Print this page

Bestop 17182 Installation Instructions Manual page 6

Toyota tundra 2007 - current ez roll tonneau

Advertisement

EZ Roll Tonneau Installation Instructions
Remove Cover
Once the latch is disengaged on the driver's side,
pull the Front Rail out of the passenger Side Rail
and lift the Cover out of the vehicle.
Special Instructions –
Bed Liners
If your vehicle is equipped with a Bed Liner that comes up over the front
bulkhead, you will need to trim the seal on the Tonneau Cover Assembly.
Mark the seal at each end of the of the Bed Liner and use scissors to trim
the bottom, "eyelash", part of the seal at the mark.
Only trim the bottom, "eyelash", part of the seal.
Trim only "Eyelash"
Rev. A 0711
Trim Seal
even with
Seal
Bed Liner
Bed Liner
Special Instructions –
Tailgate Caps
If your vehicle is equipped with a Tailgate Cap, you
will need to trim the seal on the Tonneau Cover
Assembly. Mark the seal at each end of the of the
Tailgate Cap and use scissors to trim the bottom
part of the seal at the mark.
Only trim the bottom part of the seal.
Trim only "Eyelash"
Seal
Tailgate Cap
Trim Seal even
with Tailgate Cap
17182 pg. 6

Advertisement

loading