Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Bestop Manuals
  4. Automobile Accessories
  5. 17182
  6. Installation instructions manual

Bestop 17182 Installation Instructions Manual

Toyota tundra 2007 - current ez roll tonneau
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual

Installation Instructions

EZ Roll Tonneau
www.Bestop.com
- We're here to help! Visit our web site and click on
INSTALLATION TIME
1/2 Hour
TOOLS
1/2"
SKILL LEVEL
1 - Easy
Check and secure all clamps to bed frame as indicated in the installation instructions before
operating your vehicle.
Tonneau cover clamps must be securely attached prior to vehicle operation.
Secure retaining straps when cover is in open position.
Vehicle Application:
• Toyota Tundra
"Ask a
Question". Click here for more
Wash vehicle to ensure that no dirt or abrasive materials are caught between the
truck's fi nish and the Tonneau Rail Frame.
5.5' Short Bed with or without Deck Rail System
2007 – Current
Part Number: 17182
Truck Accessories by Bestop.

Advertisement

loading

Related Manuals for Bestop 17182

Summary of Contents for Bestop 17182

  • Page 1: Installation Instructions

    • Toyota Tundra 5.5' Short Bed with or without Deck Rail System EZ Roll Tonneau 2007 – Current Part Number: 17182 www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Truck Accessories by Bestop.

  • Page 2: Parts List

    Place Side Rails on Bed Locate the 2 side rails. Remove the protective tape Tonneau Cover Assembly, Part Number 471.16.17182, Qty - 1 on the bottom of each rail and place the rail on the bed on each side of the vehicle.
  • Page 3 Without Wing Nut Utilitrack from the channel to allow the Inner Clamp to System slide into the channel. Clamp positions may vary depending on any bed Unbuckle Tie accessories you may have. Down Straps Rev. A 0711 17182 pg. 3...
  • Page 4 Tighten the front Clamp on each side until the Lock center the rear of the Frame from side to side on between the Side Rails. Washer is compressed. the vehicle. Center Frame from Side to Side Side Rail Tighten Front Clamps Rev. A 0711 17182 pg. 4...
  • Page 5 Make sure to keep the fabric tight across Side Rails. the bed to ensure a proper fi t. Fasten Hook and Loop Pull Latch Loosen Latch on Both Sides and Slide to Center Rev. A 0711 17182 pg. 5...
  • Page 6 Mark the seal at each end of the of the Bed Liner and use scissors to trim the bottom, “eyelash”, part of the seal at the mark. Only trim the bottom, “eyelash”, part of the seal. Trim Seal even with Seal Bed Liner Trim only “Eyelash” Bed Liner Rev. A 0711 17182 pg. 6...
  • Page 7 Washing: The fabric should be washed often using soap, warm water and a soft bristle brush. Rinse with clear water to remove all traces of soap or use Bestop- recommended Bestop Cleaner and Bestop Protectant. Bestop Cleaner and Bestop Protectant are specially formulated to provide a total cleaning and protection system.