Assembly; Unpacking; Service Package; Type Plate - SCAN DSA 10 Assembly And Instructions For Use

Unpacking

To protect your stove, we recommend not removing the plastic packaging from the stove until you have completed the assembly.

Service package

The service package contains the following:
• Fitting for flue collar (not required for this stove)
• Seal for flue collar (not required for this stove)
• Safety fitting (not required for this stove)
• Plastic plugs for transport safety hole at the bottom of the stove (not required for this stove)
• Various tools
• Glove
• Fire starters for first lighting

Type plate

All Scan wood-burning stoves are fitted with a type plate, that specifies the approval standards and the distance to flammable materials.
A S S E M B LY
Scan DSA 10
Freestanding room heater fired by solid fuel
Standard: EN 13240
Minimum distance to combustible materials:
Side: 550 mm - Back: 150 mm - Front: 1000 mm
CO emission at 13% O2:
Dust CO emission at 13% O2:
Flue gas temperature:
Nominal heat output:
Efficiency:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country Certificate/Standard
Classification
EUR
Intermittent EN 13240
Norway Klasse 2 SINTEF 110-0262
Schweiz LRV 11 VKF N 17943
Germany BStV 1 FSPS-Wa 1646-EN
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
1000 Scan A/S DK 5492 Vissenbjerg
EC no. 90081600
0,09% 1135 mg/Nm³
29 mg/Nm³
270°C
8 kW
81%
Wood
Intermittent
Approved by
RWE Power AG
SINTEF - NBL
RWE Power AG
RWE Power AG
01-2010
5