UPS5000-E-(25 kVA-125 kVA)-FM
User Manual
Figure 3-38 Connecting signal cables
----End
3.2.6.2 Routing Cables from the Bottom
Scenarios Without a Cable Entry Cabinet
Step 1 Remove the filler panels from the front and bottom of the cabinet.
Issue 06 (2019-12-13)
The number and colors of signal cables in
A cable entry cabinet is not required if the cross-sectional area of cables is less than or
2
equal to 150 mm
.
Route cables for the UPS from inside out and from bottom up.
Copyright © Huawei Technologies Co., Ltd.
Figure 3-38
are for reference only.
3 Installation
75