Right Handlebar Switch - Benelli TnT300 Owner's Manual

PRIMARY PARTS
Warning:
Always use the turn signals indicators when changing lanes or turning, this will ensure the vehicles around you are
aware of your movements.
4. HORN BUTTON
Press this button to activate the vehicle horn when needed.
2. PASSING LIGHT SWITCH
Use this switch to temporarily activate the vehicle high beam to warn oncoming vehicles of your presence or to get
the attention of a vehicle that doesn't see you.

RIGHT HANDLEBAR SWITCH

1. ENGINE STOP SWITCH
When the switch is in the "
position the power is on,
and the engine can be started.
When the switch is in the "
position the power is off,
and the engine cannot be started.
Caution:
During normal operation the engine stop switch should be in the "
emergency situations, for example: after and accident or if experiencing ignition switch problems.
TnT300
"
"
" (run) position. Only use this switch for