Installation Procedure; Figure 3-1: Installation Procedure - Samsung 136S Installation Manual

.
3 Installing the Product

3.3 Installation Procedure

This product must be installed by following the procedure below:
1. Preparation
Stage
 Preparation Stage

Procedure

Unpacking

Ground Wire and Tools

Recommended Tools/Instruments

Appearance Inspection
 Rack Anchoring Stage

Transport the rack frame to the installation location after unpacking

Arrange the rack frame after checking the positions of holes in the frame and anchoring points

Perform the anchoring and ground connections
 Rack Installation Stage

Transport the battery modules to the installation location

Insert the SMU in the rack frame

Insert the SMPS Assembly in the rack frame

After all components are inserted in the rack frame, attach them to the rack frame

Place the battery modules in the rack frame

Connect the busbars

Connect the signal cables from SMU to module, and module to module

Connect the signal cables from SMU to SMU
 System Installation Stage

Connect the SMPS Assembly to AC power source

Prepare the items for BMS configuration

Configure the BMS

Perform installation checks
Estimated time for each step is listed below.
20
2. Rack Anchoring
Stage

Figure 3-1: Installation Procedure

3. Rack
Installation
Installation Stage
Stage
English 8/2019. Rev 0.0
Confidential
4. System