Advertisement
SSC-1000 (gb)
2009.1.8
1:38 PM
User's Guide
3. Installation and Connection
MATRIX SWITCHER
CONTROLLER
1) Connect the RS-485 Cable.
Connect the Samsung Dome Camera, Multiplex or the RS-485 cable of
the receiver unit to the out terminal, and connect the RS-485 cable of a
different controller to the RX in terminal, the RS-485 cable of the Matrix
Switcher to the matrix terminal. For the RX terminal, number 3
(yellow) is DATA "+" and number 5(red) is DATA "–". For the matrix
terminal, number 2 is DATA "+" and number 3 is DATA "–".
2) Put in the DC 9V power.
Page 12
IN
RX
OUT
DC 9V 0.6A
MATRIX
ADAPTOR
SAMSUNG DOME CAMERA
/RECEIVER UNIT/MULTIPLEX
IN
RX
OUT
DC 9V 0.6A
MATRIX
12
4. Setting and Manipulating
1) Setting
! In order to enter into the set-up mode in
the initial state, press the MENU button.
@ If you press the MENU button, words that
ask for the password get indicated in
LCD, and if you put in the password, the
main menu gets indicated. When it is in
password disable, it immediately enters
the main menu.
# Select the item you want to set up from
the main menu. Moves of items are done
by the " " and " " buttons, and for
selection, if you press the ENTER button,
you enter the set-up menu of the item you
desire. If you press on the MENU button
in the main menu state, you can come out
of the set-up mode.
$ CONTROLLER SET
If you select the controller set in the main
menu, you can make set-ups related to the
controller. Moves of items are done by the
" " and " " buttons, and for selection, you
can press the ENTER button. When you
come out of the controller menu, press
the MENU button.
MON = [ 0 0 ]
CAM=[ 0 0 0 ]
MANUAL SELECT
MANUAL
INPUT PASSWORD
[
]
CONTROLLER SET
CAMERA
SET
SYSTEM INFO
PASSWORD
SET
BAUDRATE:
9600
PROTOCOL:
SAMSUNG
ADDRESS NO [ 0 ]
13
Hide quick links:
Advertisement
