.
3
Installing the Product
3. Arrange the rack frame after verifying that the holes in the frame and anchoring points are aligned.
4. Connect four anchoring points on the bottom of the rack.
NOTICE
Anchor the frame with M16 bolts and nuts.
The fastening torque should be 140Nm / 1,425kgf cm.
Check the rack and other parts for distortion caused by unpacking.
Bottom of the Rack Frame
34
Figure 3-10: Rear panel hooks (four)
Figure 3-11: Rack Anchoring Points (4 EA)
Confidential
English 8/2019. Rev 0.0