Product Overview; Controls - Toro STX-26 Operator's Manual

Product Overview

1. Reverse 3. Engine
safety
plate
2. Control 4. Battery
panel

Controls

Become familiar with all the controls
you start the engine and operate the machine.
Figure 4
5. Tie-down/lift 7. Chip
point shield
6. Track 8. Grinder
(Figure 5) before
Control Panel
1. Key switch
g013171
2. Throttle lever
3. Choke lever
4. Hour meter
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease the engine speed.
Choke Lever
Before starting a cold engine, move the choke lever
forward. After the engine starts, regulate the choke
to keep the engine running smoothly. As soon as
possible, move the choke lever all the way rearward.
Note:
A warm engine requires little or no choking.
Hour Meter
When the engine is off, the hour meter displays the
number of hours of operation that have been logged
on the machine.
11
Figure 5
5. Traction control
6. Reference bar
7. Grinder
control/hydraulic-lift lever
, R , and S . Refer to
FF UN TART
16).
g025098