Product Overview; Controls - Toro SGR-6 22600 Operator's Manual

Product Overview

1
2
3
4
5
6
7
8
G025789
1. Handle
2. Throttle lever
3. Handle-release knob
4. Air filter
5. Sediment cup
6. Fuel valve
7. Choke

Controls

Become familiar with all the controls (Figure 3 and Figure 6)
before you start the engine and operate the machine.
Handle-Release-Knob
The handle on this machine has the capability to be folded
down for easier transport. Unscrew the handle release knob
from the machine (Figure 4).
13
12
11
Figure 3
8. Starter
9. Cutting wheel
10. Lift
11. Belt cover
12. Fuel cap
13. Safety bail
10 1. Handle-release knob
Fold the handle down toward the machine and screw the
9
knob back onto the handle (Figure 5).
Throttle Lever and Safety Bail
The throttle lever controls the engine speed. With the lever
released, in the disengaged position, the engine runs at idle.
This is also the starting position. When you pull the lever to
the handle, the engine speed increases, the centrifugal clutch
engages, and the cutting wheel rotates.
The safety bail controls the engine. Hold the safety bail
against the handle to deactivate the engine kill switch so that
the engine will start. Release the safety bail to stop the engine.
6
1
Figure 4
Figure 5
g014871
g014870