Setup
Checking the Fluid Levels
Before starting the engine for the first time, check
the engine-oil and hydraulic-fluid levels. Refer to the
following sections for more information:
•
Checking the Engine-Oil Level (page 24)
•
Checking the Hydraulic-Fluid Level (page 38)
Charging the Battery
Charge the battery; refer to
(page 30)
for more information.
Opening the Lift Valve
Before you can raise the grinder and move the
machine, you must open the lift valve located under
the control panel
(Figure
clockwise to allow you to lift the grinder. The farther
you turn the knob, the faster the head raises and
lowers when activated.
Charging the Battery
3). Turn the knob counter
Figure 3
Product Overview
1. Control panel
2. Chip shield
Controls
Become familiar with all the controls
you start the engine and operate the machine.
Control Panel
g019867
1. Key switch
2. Throttle lever
3. Engine indicator light
4. Hour meter
5. Traction control
10
Figure 4
3. Engine
5. Grinder
4. Battery
6. Track
(Figure
Figure 5
6. Reference bar
7. Reverse safety plate
8. Grinder control lever
9. Handle
g024906
5) before
g024907