Toro STX-26 Operator's Manual page 13

Grinder Control/Hydraulic-Lift
Lever
Operate the grinder using the grinder control lever
as follows:
•
To start the grinder
trigger and then press the red button on the top of
the lever. Once the grinder has started, you can
release the red button.
•
To stop the grinder
for more than a half second.
Note:
If you are operating the grinder and
momentarily release the trigger (i.e., less than a
half second), the grinder continues to operate.
1. Neutral
2. Start the grinder
(Figure 11), squeeze the
(Figure 11), release the trigger
Figure 11
3. Run the grinder
4. Stop the grinder
•
To raise the grinder, pull the lever rearward
12).
•
To lower the grinder, push the lever forward
13).
•
To rotate the grinder to the right or left, move the
lever in the desired direction
g013174
13
Figure 12
Figure 13
(Figure 14).
(Figure
g013623
(Figure
g013624