Other Advanced Bios Configurations - Oracle MICROS 6 Series Setup Manual

Hide thumbs Also See for MICROS 6 Series:
Table of Contents

Advertisement

Exit Saving Changes: Save the current configuration settings, exit the
configuration utility, and boot into the operating system.
Exit Discarding Changes: Discard the current configuration settings, exit the
configuration utility, and boot into the operating system.
Load Setup Defaults: Load the default UEFI settings. Only available on the 620
and 650.
Load UEFI Defaults: Load the default UEFI settings. Only available on the 610.
Discard Changes: Discard the current configuration settings without exiting the
configuration utility. This resets the configurations to the last saved state.
Save Changes: Save the current configuration settings.

Other Advanced BIOS Configurations

On the Advanced tab, select Special Configuration and configure the settings as
described in the following table:
Table 9-2
Setting
Factory Recovery
Cash Drawer Voltage
COM Port 1 Voltage
12V Powered USB
24V Powered USB (620 and 650 only)
USB Port 1
USB Port 2
USB Port 3
USB Port 4
USB Port 5 (620 and 650 only)
USB Port 6 (620 and 650 only)
422 Mode Selection
Caution: Do not change advanced configuration settings without guidance
because incorrect or incompatible settings may cause the system to fail.
Advanced BIOS Security Settings
Other Advanced BIOS Configurations
Description of Option
Select factory recovery settings:
Disabled: You cannot perform factory
recovery.
Enabled: You can perform factory
recovery.
For the 610, these settings are also available:
Phase 1: Initiates the factory recovery
process.
Phase 2: Loads the recover image.
Set the voltage for the Cash Drawer port.
Set the voltage for the COM1 port.
Enable or Disable the 12V powered USB port.
Enable or Disable the 24V powered USB port.
Enable or Disable USB port 1.
Enable or Disable USB port 2.
Enable or Disable USB port 3.
Enable or Disable USB port 4.
Enable or Disable USB port 5.
Enable or Disable USB port 6.
Enable or Disable selection between RS-422
and RS-232 for the IDN port.
Chapter 9
9-4

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MICROS 6 Series and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Micros 620Micros 650Micros 610

Table of Contents

Save PDF