Securing The Workstation Display To The Wall Mount - Oracle MICROS 6 Series Setup Manual

Securing the Workstation Display to the Wall Mount

The Workstation 6 Series can be mounted on a wall using an optional wall mounting
bracket.**
Install the wall mount:
1.
a.
b.
c.
d.
Insert the power connector in the back of the workstation.
2.
Ensure that the metal bracket is levelled with the integrated spirit level.
Mark the positions of the holes at the four corners.
Create the holes by drilling into the wall.
Secure the metal bracket to the wall with four screws. The mounting screws
are not provided. Ensure you are using the correct screws that meet the needs
of the installation, such as wood screws, dry wall screws, concrete screws, or
masonry screws.
Securing the Workstation Display to the Wall Mount
Chapter 6
6-14