Control Panel Keys - Tesla 3 Series Operating Instruction

ENG
Orange (Coaxial signal cable)
Yellow (VIDEO signal cable)
White (AUDIO-L signal cable)
Red (AUDIO-R and Pr/Cr signal cables)
When connecting outdoor antenna to signal port of the
TV set, please turn off the main power switch of the TV set
first. Do not approach the outdoor antenna to high voltage
mains power line to avoid electric shock. The wired network
antenna connected to this TV set must be isolated from
the protective grounding, or else it will cause fire or other
hazards.

CONTROL PANEL KEYS

Up
Right Left
Down
CI Card Port
USB Interface
Warning
1. Power LED indicator and remote receiving window.
2. Rocker button combination key:
Power on or standby with OK rocker:
1. When Plugged power cord into the electrical socket, you can press
OK rocker to turn on the TV.
2. In power on state, press OK rocker to display the function menu, then
move rocker Left/Right to select Power and press OK rocker to switch
to standby mode.
After turn on the TV, Press OK Rocker:
1. In non-OSD menu operation, press OK rocker to display the menu
which includes 4 sorts: Menu, Source, Power, Exit. During the menu
operation, press OK rocker to confirm the operation, the function is
the same with pressing [OK] key on the remote control.
2. Under the non USB source menu, long press OK rocker 2 seconds to
return to previous page.
3. Under the USB source menu, long press OK rocker 2 seconds to
display the "Input Source" menu on the screen.
(100-240VAC, 60/50Hz)
AV Input
O
6
To power socket
RF