Boot Settings Configuration Submenu - National Instruments PXI Series User Manual

Only one device of a given type will be shown in this list. If more than one device
Note
of the same type exists, use the Device BBS Priorities submenus to re-order the priority of
devices of the same type.
The following submenus will be displayed if one or more bootable devices
of the corresponding type is present:
•
•
•
•

Boot Settings Configuration Submenu

Use this submenu to apply alternate configurations to boot settings.
Normally, you do not need to modify these settings, as the factory default
settings provide the most compatible and optimal configuration.
•
•
© National Instruments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
removable devices such as USB flash disk drives or USB CD-ROM
drives, or the PXE network boot agent. The BIOS will first attempt to
boot from the device associated with Boot Option #1, followed by
Boot Option #2, and Boot Option #3. If multiple boot devices are not
present, the BIOS setup utility will not display all of these
configuration options. To select a boot device, press <Enter> on the
desired configuration option and select a boot device from the resulting
menu. You can also disable certain boot devices by selecting Disabled.
Hard Drive BBS Priorities—Use this setting to access the Hard
Drive BBS Priorities submenu to re-order or disable bootable hard
drive devices. Refer to the Hard Drive BBS Priorities Submenu
for more information.
CD/DVD ROM Drive BBS Priorities—Use this setting to access the
CD/DVD ROM Drive BBS Priorities submenu to re-order or disable
bootable CD/DVD ROM drive devices. Refer to the
Drive BBS Priorities Submenu
Floppy Drive BBS Priorities—Use this setting to access the Floppy
Drive BBS Priorities submenu to re-order or disable bootable floppy
drive devices. Refer to the Floppy Drive BBS Priorities Submenu
section for more information.
Network Device BBS Priorities—Use this setting to access the
Network Device BBS Priorities submenu to re-order or disable
bootable network devices. Refer to the
Submenu section for more information.
Setup Prompt Timeout—This setting specifies the number of
seconds the system will wait for a BIOS Setup menu keypress
(the <Delete> key). The default value is 2 seconds.
Bootup NumLock State—This setting specifies the power-on state of
the keyboard NumLock setting. The default value is On.
2-13
Chapter 2 Installation and Configuration
CD/DVD ROM
section for more information.
Network Device BBS Priorities
NI PXI-8115 User Manual
section