National Instruments PXI Series User Manual page 72

Electromagnetic Compatibility
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
•
•
•
•
•
Note In the United States (per FCC 47 CFR), Class A equipment is intended for use in
commercial, light-industrial, and heavy-industrial locations. In Europe, Canada, Australia
and New Zealand (per CISPR 11) Class A equipment is intended for use only in
heavy-industrial locations.
Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical
Note
equipment that does not intentionally generates radio frequency energy for the treatment
of material or inspection/analysis purposes.
Note For the standards applied to assess the EMC of this product, refer to the Online
Product Certification section.
CE Compliance
This product meets the essential requirements of applicable European
Directives as follows:
•
•
Online Product Certification
Refer to the product Declaration of Conformity (DoC) for additional
regulatory compliance information. To obtain product certifications and the
DoC for this product, visit
number or product line, and click the appropriate link in the Certification
column.
© National Instruments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
EN 61326 (IEC 61326): Class A emissions; Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
2006/95/EC; Low-Voltage Directive (safety)
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
ni.com/certification
A-5
Appendix A Specifications
, search by model
NI PXI-8115 User Manual