Parallel Port - National Instruments PXI Series User Manual

Table 3-5. 10/100/1000 LAN Connector LED States
LED Color
Off
On (steady state)
Top Green
On (brighter and pulsing)
Unlit Off
Bottom Green On
Amber On

Parallel Port

Figure 3-5 shows the location and pinouts for the IEEE 1284 (parallel)
connector on the NI PXI-8115. Table 3-6 lists and describes the IEEE 1284
connector signals.
Parallel port adapter cables are available from National Instruments,
part number 777169-01.
© National Instruments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
LED State
LAN link is not established.
LAN link is established.
The controller is communicating with another
computer on the LAN.
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
1000 Mbit/sec data rate is selected.
NI PXI-8115
Embedded Controller
Figure 3-5. Parallel Port Connector Location and Pinout
3-7
Chapter 3 I/O Information
Condition
1 19
Parallel Port
36
18
NI PXI-8115 User Manual