Front Panel Features; Data Storage - National Instruments PXI Series User Manual

Front Panel Features

The NI PXI-8115 has the following front-panel features:
•
•
Please refer to Chapter 5, Troubleshooting, for more information about
diagnosing fault conditions.

Data Storage

The NI PXI-8115 has the following data storage features:
•
•
© National Instruments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
A controller reset pushbutton (press the button to generate a reset to the
controller)
Four front panel LEDs that show PC status
– The PWR OK/FAULT LED indicates the power status of the
controller. The LED will indicate one of the following states:
• Green ON steady—PXI and onboard power is on and within
regulation limits.
• Green BLINKING—The controller has entered the soft off
state and is safe to power down.
• OFF—The controller is powered off.
• Red BLINKING—The controller has detected a power rail
fault when trying to boot.
• Red ON steady—The controller has detected a thermal fault
and has shut down to protect the system.
– The DRIVE LED indicates when an access to the internal hard
disk is occurring.
– The USER1 LED is a bi-color green/yellow LED. You can define
the USER1 LED to meet the needs of your LabVIEW application.
– The USER2 LED is a bi-color green/yellow LED. You can define
the USER2 LED to meet the needs of your LabVIEW application.
2.5 in. SATA notebook internal hard drive
USB storage support—USB CD/DVD-ROM, mass storage device,
or floppy drive
3-15
Chapter 3 I/O Information
NI PXI-8115 User Manual