Hard Drive Bbs Priorities Submenu; Cd/Dvd Rom Drive Bbs Priorities Submenu; Floppy Drive Bbs Priorities Submenu; Network Device Bbs Priorities Submenu - National Instruments PXI Series User Manual
Embedded controller
Hide thumbs
Also See for PXI Series:
- User manual (89 pages) ,
- Installation manual (11 pages) ,
- User manual (42 pages)
Table of Contents
Advertisement
Chapter 2
Installation and Configuration
Hard Drive BBS Priorities Submenu
•
CD/DVD ROM Drive BBS Priorities Submenu
•
Floppy Drive BBS Priorities Submenu
•
Network Device BBS Priorities Submenu
•
Security Menu
Use this menu to enable BIOS security options.
•
•
NI PXI-8115 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Boot Option #1, Boot Option #2, Boot Option #3—These settings
specify the boot priority of hard drive devices. The highest priority
device is displayed on the main Boot Option Priorities list.
Optionally, each device can also be Disabled if the device should never
be used as a boot device.
Boot Option #1, Boot Option #2, Boot Option #3—These settings
specify the boot priority of CD/DVD ROM drive devices. The highest
priority device is displayed on the main Boot Option Priorities list.
Optionally, each device can also be Disabled if the device should never
be used as a boot device.
Boot Option #1, Boot Option #2, Boot Option #3—These settings
specify the boot priority of floppy drive devices. The highest priority
device is displayed on the main Boot Option Priorities list.
Optionally, each device can also be Disabled if the device should never
be used as a boot device.
Boot Option #1, Boot Option #2, Boot Option #3—These settings
specify the boot priority of network devices. The highest priority
device is displayed on the main Boot Option Priorities list.
Optionally, each device can also be Disabled if the device should never
be used as a boot device.
Setup Administrator Password—This setting specifies a password
that must be entered to access the BIOS Setup Utility. If only the
Administrator's password is set, then this only limits access to the
BIOS setup program and is only asked for when entering the BIOS
setup program. By default, no password is specified.
User Password—This setting specifies a password that must be
entered to access the BIOS Setup Utility or to boot the system. If only
the User's password is set, then this is a power on password and must
be entered to boot or enter the BIOS setup program. In the BIOS setup
2-14
ni.com
Advertisement
Table of Contents
