Wiznet WizFi360 At Instruction Set page 8

AT+CIPAP_CUR
AT+CIPAP_DEF
AT+CWDHCPS_CUR
AT+CWDHCPS_DEF
AT+CWSAP_CUR
AT+CWSAP_DEF
AT+CWLIF
AT+CWHOSTNAME
AT+CIPMODE
AT+SAVETRANSLINK
AT+CIPMUX
AT+CIPSERVER
AT+CIPSTART
AT+CIPSSLSIZE
AT+CIPSTATUS
AT+CIPSEND
TCP / IP
command AT+CIPSENDEX
AT+CIPSENDBUF
AT+CIPBUFRESET
AT+CIPBUFSTATUS
AT+CIPCHECKSEQ
AT+CIPDINFO
AT+CIPCLOSE
AT+CIFSR
AT+CIPSTO
AT+GMR
Management
Command
AT+CIUPDATE
WizFi360 AT command
Set SoftAP mode of IP information is not saved to Flash
SoftAP mode setting IP information, saved to Flash
Set DHCP IP allocation under SoftAP model range, not saved to
Flash
Set DHCP IP allocation under SoftAP mode range, saved to Flash
SoftAP establish and set parameters are not saved to Flash
SoftAP establish and set the parameters, save to Flash
Queries Station of the list of connected SoftAP
Stting the Name of Station
Setting data transmission
Save the data pass-through mode is set to Flash
Setting up connection mode
Establishing TCP Server
Establish a connection TCP Client, or UDP transport
establishment
Setting up SSL cache size
Query as network connection information in Station mode
Setting the length of the transmission data / incoming data
transparent mode
Setting the length of the transmission data
TCP transmit buffer write data
Reset Count (TCP transmission buffer)
Query the status of the TCP send buffer
TCP send inquiry write cache of a package sent successfully
Receiving data format
Close TCP, UDP
Query IP and MAC address information
TCP Server communication connection is provided without
disconnection time interval
Firmware version information
Firmware Upgrade