Wiznet WizFi360 At Instruction Set page 44

AT+SAVETRANSLINK=<mode>,<remote IP>,<remote port>[,<type>,<TCP keep alive>]
<mode>:
-0: The AT command transmission mode is set on boot
-1: The transparent transmission mode is set on boot
<remote IP>: Destination IP address or domain name
Parameters
<remote Port>: Destination port number
and
description
<type>: TCP(default) or UDP
<TCP Keep alive>: TCP Keep-alive function
- 0: Disable the TCP Keep-alive function (factory default)
- 1~ 7200: Enable the TCP Keep-alive function, and set the Keep-alive packet transmission time
interval, unit is second.
Return Values
\r\n
and
OK\r\n
descriptions
Predecessors no
Command: AT+SAVETRANSLINK=1,"192.168.2.2",5000,"TCP",5\r\n
Examples Reply:\r\n
OK\r\n
b. Save the data transparent mode (UDP transport) to Flash
Command string
AT+SAVETRANSLINK=<mode>,<remote IP>,<remote port>[,<type>,<UDP Local port>]
<mode>:
- 0: The AT command transmission mode is set on boot
-1: The transparent transmission mode is set on boot
Parameters
and <remote IP>: Destination IP address or domain address
description
<remote port>: Destination port number
<type>: TCP(default) or UDP
<UDP Local port>: local port number
WizFi360 AT command
Set the transmission mode
in TCP
Function Description
Set the transmission mode
in UDP