Register Your Appliance; Important Safety Instructions; Assembling The Appliance; Connecting Gas To The Appliance - Barbecook CAMPO User Manual

1

REGISTER YOUR APPLIANCE

Thank you for purchasing a Barbecook appliance! A whole new
world is waiting for you to explore, whether it be in the peace
and quiet of nature or amidst the hustle and bustle of the city.
Become a grill master in our #barbecook community and let us
put your grill skills in the spotlight.
Register your Barbecook appliance online and get some major
benefits:
• You get access to the full user manual and get to know
every bit of your appliance.
• You benefit from a personalized after sales service, allowing
you to quickly find spare parts and to profit from an optimal
warranty service.
• We inform you about product updates and give you tips,
tricks and grillspiration to bring out the grill master in you.
Ready for an adventure? Register your product and join the
#barbecook community!
For more information about registering your appliance,
refer to www.barbecook.com.
Barbecook respects your privacy. Your data will not be
sold, distributed or shared with third parties.
2

IMPORTANT SAFETY INSTRUCTIONS

2.1 Read and follow the instructions
Read the instructions before using the appliance. Always follow
the instructions carefully. Assembling or using the appliance
differently can cause fires and material damage.
Damages caused by not following the instructions
(improper assembly, misuse, inadequate maintenance...)
are not covered by the warranty.
2.2 Be cautious with gas
Working with gas is perfectly safe, but requires some extra
caution:
• Always store gas cylinders outdoors, in a well-ventilated
area. Make sure they are not exposed to excessive heat or
direct sunlight.
• Never store your gas cylinder or spare gas cylinder in the
cabinet of your appliance.
• While in use, put your gas cylinder on the flip stand at the
side of the appliance.
• Never store your spare gas cylinder near a gas appliance in
use.
• Always turn off the gas supply at the gas cylinder after use.
• Never smoke near a gas appliance in use or near a gas
cylinder (full/empty).
If you smell gas, immediately close the gas supply,
extinguish all flames and open the lid of the appliance.
If the smell lasts, call your gas supplier or the fire
department.
2.3 Select an appropriate location
Use the appliance outdoors only. Using it indoors, even in a
garage or shed, can cause carbon monoxide poisoning.
When selecting an outdoor location, always:
• Place the appliance at least three meters away from any
building, in an open and well-ventilated area.
• Make sure there is a free air flow to the burners and the vent
holes in the cabinet at all times.
4
• Make sure the appliance is not under an overhanging
structure (a porch, a shelter...) or under foliage.
• Put the appliance on a firm and stable surface. Never put it
on a moving vehicle (a boat, a trailer...).

2.4 Safety warnings

• Use outdoors only.
• Read the instructions before using the appliance.
• Do not move the appliance during use.
• Do not leave the appliance unattended during use,
especially in the presence of children and animals.
• WARNING: accessible parts may be very hot. Keep young
children away.
• Use appropriate protection when handling hot parts (lid,
grill ... ).
• This appliance must be kept away from flammable materials
during use.
• Do not use wood, charcoal, lava rocks or ceramic briquettes
on a gas appliance.
• Do not use the appliance when you have consumed alcohol
or taken drugs.
• Tum off the gas supply at the gas cylinder after use.
• Do not modify the appliance.
3

ASSEMBLING THE APPLIANCE

3.1 Safety instructions
• Do not modify the appliance when assembling it. It is very
dangerous and not allowed to alter parts that are
pre-assembled and/or sealed by the manufacturer.
• Always follow the assembly instructions carefully.
• The user is responsible for the correct assembly of the
appliance. Damages caused by improper assembly are not
covered by the warranty.
3.2 To assemble the appliance
1. Put the appliance on a flat and clean surface.
2. Assemble the appliance as shown on the assembly
drawings. You find them in the second part of this manual,
after the exploded view of your appliance.
To make the assembly easier, some screws are
premounted in the correct screw hole. You have to loosen
these screws a few millimeters before assembling the
appliance. This allows you to slide parts over the screws
and tighten them very easily.
The blister packs can contain more screws than
necessary. Screws can be left over after the assembly.
4 CONNECTING GAS TO THE
APPLIANCE
4.1 Which cylinder, hose and regulator?
Before you can connect gas to the appliance, you have to buy
a gas cylinder, hose and pressure regulator. The table below
shows you which cylinder, hose and regulator you have to use.
In Belgium (BE), for example, you have to use a propane cylinder
with a hose and regulator tor 37 mbar or a butane cylinder with a
hose and regulator for 28-30 mbar.
www.barbecook.com