ADJ HYDRO WASH X7 User Instructions page 29

Hydro Wash X7
DMX SETTINGS - The submenus listed under DMX SETTINGS are as follows: DMX Address,
DMX Channel Mode, and No DMX Status.
- DMX ADDRESS - In this submenu you can find and set your desired DMX address.
- DMX CHANNEL MODE - In this submenu you can find and set your desired DMX channel mode.
- NO DMX STATUS - This submenu setting is used as a precaution mode in case the DMX signal is
lost or interrupted. The operating mode chosen in this submenu is the running mode the fixture
will go into when the DMX signal is lost. Listed below are the 3 modes.
• Hold Last - This setting will have the fixture stay in the last DMX setup.
• Blackout - This setting will have the fixture automatically go into stand by mode.
• Manual - This setting will go into the current manual control set up. See MANUAL CONTROL.
PERSONALITY - The submenus listed under PERSONALITY are as follows: Select Signal, Status
Settings, WiFly Settings, Reset Motors, Display, and Service.
- SELECT SIGNAL - In this submenu you can select your desired DMX control mode:
• DMX - Control the unit via DMX cable connection.
• WiFly - Control the unit via WiFly.
• WiFly and DMX Out - Control the unit via WiFly connection. The DMX signal is sent to the next
unit via DMX cable.
- STATUS SETTINGS - In this submenu you are able to access and adjust/change: Pan Invert, Tilt
Invert, P./T. Feedback, P./T. Speed, and Hibernation.
- WIFLY SETTINGS - In this submenu you are able to access and adjust/change: WiFly Channel setting
and Enable/Disable WiFly.
- FAN SETTINGS - In this submenu you are able to select your desired fan speed settings for both
the head and base fans.
- DIM MODES - In this submenu you are able to select your desired dimmer mode and adjust the
dimming speed time. See page 34 for the dimmer curve chart.
- LED REFRESH RATE - In this submenu you are able to select your desired LED refresh rate.
- GAMMA - In this submenu you are able to select your desired gamma setting.
- RESET MOTORS - In this submenu you are able to reset selected motors.
- DISPLAY - In this submenu you are able to access and adjust/change the backlight intensity, display
inversion, screen saver display time, and display lock function.
ADJ Products, LLC - www.adj.com - Hydro Wash X7 User Manual Page 28
System Menu