Table of Contents
Advertisement
Hydro Wash X7
MENU
SUBMENU
DMX Address
DMX Channel
DMX SETTINGS
Mode
No DMX Status
Select Signal
Status Settings
WiFly Settings
Fan Settings
PERSONALITY
Dim Modes
LED Refresh Rate
Gamma
Reset Motors
Display
Service
(Pass Code = 050)
ADJ Products, LLC - www.adj.com - Hydro Wash X7 User Manual Page 25
OPTIONS
001-XXX
15Ch / 17Ch / 41Ch
Hold Last / Blackout / Int Programs / Manual
DMX: Yes / No
WiFly: Yes / No
WiFly and DMX Out: Yes / No
Pan Invert: On / Off
Tilt Invert: On / Off
P./T. Feedback: On / Off
P./T. Speed: Speed 1 / Speed 2
Hibernation: Off / 01M~99M / 15M
Set WiFly Channel: 00~14
Enable / Disable WiFly
Head: Auto / High / Silent (Low)
Base: Auto / High / Silent (Low)
Standard/Stage/TV/Architectural/Theatre/Stage2
Dim Speed: 0.1-0.9s ~ 1-10s
900Hz / 1000Hz / 1100Hz / 1200Hz / 1300Hz /
1400Hz / 1500Hz / 2500Hz / 4000Hz /5000Hz /
6000Hz / 10000Hz / 15000Hz
1.0 / 2.0 / 2.2 / 2.4 / 2.6 / 2.8
Reset All Motor: YES / NO
Pan/Tilt Reset: YES / NO
Zoom Reset: YES / NO
Intensity: 1~10 (Dimmest-Brightest)
Display Invert: YES / NO
Screen Saver Delay: OFF~10M
Lock On/Off: ON / OFF
Calibration - Pass Code = 050
USB Port Power: ON / OFF
Update Software
Factory Restore: YES / NO - Pass Code = 011
System Menu
DESCRIPTION
DMX Addressing
DMX Channel Mode
Selection
DMX Lost Status
Control via DMX
Control via WiFly
Control via WiFly and send
DMX Out via DMX cable
Reverse Pan Motion
Reverse Tilt Motion
Pan/Tilt Movement Feedback
Pan/Tilt Movement Speed
Sleep Setting (No Activity)
Set WiFly Wireless Channel
Activate / Deactivate WiFly
Head Fan Speed Setting
Base Fan Speed Setting
Dimming Curve Modes
Dimming Speed
LED Refresh Setting
Gamma Brightness
Reset All Motors
Reset the Pan & Tilt Motors
Reset the Zoom Motor
Display Intensity Adjustment
Display Inversion
Display Blackout Time
Display Control Lock
Calibration/Adjustments
USB Port Activation
Software Update
Restore Factory Settings
Advertisement
Table of Contents
