ADJ HYDRO WASH X7 User Instructions page 15

Hydro Wash X7
CLAMP
(Not Included)
SAFETY CABLE
(Not Included)
Screw one clamp via a M12 screw and nut into the Omega Bracket. Insert the quick-lock fasteners
of the Omega Bracket into the respective holes of the fixture base plate. NOTE: The clamp must be
attached to the Omega Bracket before attaching the bracket to the fixture. Tighten the quick-
lock fasteners fully clockwise. Pull the safety-cable through the opening located on the bottom of the
unit and over the trussing system or a safe fixation spot. Insert the end in the carabine and tighten
the safety screw.
ADJ Products, LLC - www.adj.com - Hydro Wash X7 User Manual Page 14
OMEGA
BRACKET
Fixture Installation
OMEGA
BRACKET