SolidRF Signal Plus Manual page 16

To uphold network protection standards and ensure compliance, all active cellular devices must maintain a
separation distance of at least six feet between the inside unit antenna and outside unit antenna and at
least four feet of separation distance from the inside unit. Use only the power supply provided in this
package. Use of a non-SolidRF product or accessory may result in damage to the equipment or
components of the equipment. The inside unit is designed for use in an indoor, temperature-controlled
environment (less than 100 degrees Fahrenheit). It is not intended for use in attics or similar locations
where temperatures may be in excess of that range.
RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not expressly approved by
SolidRF could void the authority to operate this equipment.
FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL BOOSTER WITH YOUR WIRELESS PROVIDER,
PLEASE SEE BELOW:
Sprint:
T-Mobile/MetroPCS: https://support.t-mobile.com/docs/DOC-9827
Verizon Wireless:
AT&T:
U.S. Cellular:
Customer service number
877-579-7878
Safety Guidelines
http://www.sprint.com/legal/fcc_boosters.html
http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html
https://securec45.securewebsession.com/attsignalbooster.com/
http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp
16