Mounting Instruction - R82 Panda Futura Mounting Instruction

Mounting instruction

Back fixture when using Panda Futura sz.3+4 on High-low in vehicle
Follow the description below to mount the back fixture:
1. Dismount the headrest fitting (B)
2. Fasten the back fixture in the High-low slide (C). Mount the upper
part of the back fixture on the back of the seat, together with fitting
(B) the enclosed 4 screws and 4 washers (D).
Use the bolts (E) to adjust the height and tighten afterwards!
3. Make sure to tighten all of the screws (D, E, F) after the correct po-
sition is achieved.
D
B
E
C
F