Parkside PLSD 48 A1 Translation Of The Original Instructions page 9

■ Avoid contact between the hot soldering tip and the plastic parts
of the holder . Otherwise, the appliance might be damaged .
■ In case of danger, remove the plug from the socket immediately .
■ CAUTION! RISK OF POISONING! Do not breathe in vapours .
■ During work over an extended period in which hazardous
vapours can be created, always ensure sufficient ventilation of the
workplace . In addition, protective gloves, a face mask and work
apron are recommended .
■ Avoid eating, drinking and smoking in rooms where soldering
work is taking place . Otherwise, lead residues on your hands
might contaminate the food, drink or cigarettes and be absorbed
into your body .
■ Always wash your hands thoroughly after soldering .
■ Do not dispose of solder waste in normal domestic waste!
Solder waste should be disposed of with hazardous waste .
│ GB │ IE │ NI
■ 6
PLSD 48 A1