Parkside PLSD 48 A1 Translation Of The Original Instructions page 8

To avoid potential risks, damaged mains cables
■
should be replaced by the manufacturer, their
customer service department or a similarly quali-
fied person .
CAUTION - RISK OF ELECTRIC SHOCK! Do not
use the soldering station if the handle, the
mains cable or the plug are damaged .
Never open the appliance!
Residual risks
■ RISK OF BURNS! Do not touch the heated soldering tip or the
molten solder . There is a risk of being burnt . Always allow the
appliance to cool down completely before changing, cleaning
or checking components .
■ After work, allow the soldering iron to cool down in the air only .
Do not attempt to quench it with water!
■ CAUTION! RISK OF FIRE! Put down the soldering iron only into
the special holder or onto another fireproof surface .
■ During breaks from work, the soldering iron must be placed into
the holder .
■ Keep the appliance away from flammable material .
■ Never leave a switched-on appliance unsupervised .
■ CAUTION! RISK OF INJURY! Keep your hands away from the
heated workpiece . The heat can be emitted through the work-
piece .
PLSD 48 A1
GB │ IE │ NI │
5 ■