BMW C 400 X Rider's Manual page 91

down until the desired entry is
marked.
To move the cursor up in lists,
turn the Multi-Controller 1
up until the desired entry is
marked.
Confirming the selection
Select desired entry.
Multi-Controller 1 short press
to right.
Calling up the last menu
used
In the Pure view: press
and hold the bottom of the
https://www.motorcycle-manual.com/
MENU rocker button.
The last used menu is called
up. The last marked entry is
selected.
Operating focus change
When the Navigator is
connected, you can switch
between the operation of the
Navigator and the TFT display.
Changing the operating
focus
with navigation system
Install navigation device
( 173).
Display Pure view (
Rocker button MENU long
press up.
Operating focus changes to the
Navigator or the TFT display.
The respectively active device
is marked on the left in the up-
per status line. Operator ac-
tions apply to the respectively
active device until the operating
focus is changed again.
Operating the navigation sys-
tem. (
Changing the display for
rider info status line
Requirement
The motorcycle is stopped. The
Pure view is displayed.
Switching on ignition (
In the TFT display, all informa-
tion necessary for operation on
public roads is provided by the
OA
onboard computer. The infor-
mation can be displayed in the
upper status line.
87).
Selecting the content of the
rider info status line (
174)
58).
90).
5
89
z