BMW C 400 X Rider's Manual page 151

Screw in the quick-re-
lease axle, front
24 lb/ft (32 Nm)
Tighten the clamping bolts 3
and 2 to the appropriate
torque.
Clamping bolts (quick-re-
lease axle) in telescopic
forks
14 lb/ft (19 Nm)
Remove front-wheel stand.
https://www.motorcycle-manual.com/
Mount the brake caliper 4 on
the brake disc, ensuring that
the brake disc 5 is installed
between the brake pads 3.
Install the brake caliper on the
other side in the same manner.
Mount the screws 2 on the
left and right until the screw
head is in contact, but do not
tighten.
Activate the brake several
times until the brake pads are
in contact, and secure the
brake lever with a rubber
band.
Tighten the screws 2 on the
left and right with the appropri-
ate torque.
Brake caliper on fork leg
24 lb/ft (32 Nm)
10
149
z