BMW C 400 X Rider's Manual page 139

Install the spacer buffers 1 on
the left and right in the posi-
tions shown.
Release the mounting bolts 2
on the left and right.
Push the mounts 3 on the left
https://www.motorcycle-manual.com/
and right outward, continuing
until the front suspension fits
between them.
Use retaining pins 4 on the left
and right to set the front wheel
stand to the desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
Align the mounts 3 on the
left and right so that front
suspension rests securely on
them.
Tighten the mounting bolts 2
on the left and right.
ATTENTION
Lifting-off of the center stand
if the vehicle is raised too
high
Component damage cause by
tipping over
When raising the motorcy-
cle, make sure that the center
stand remains on the ground.
Adjust the height of the front
wheel stand if necessary.
Apply uniform pressure to push
front wheel stand down and
raise the Scooter.
10
137
z