BMW C 400 X Rider's Manual page 155

Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Lubricate the gearing of the
output shaft.
Lubricant
Staburags NBU 30 PTM
Do not apply lubricant to the
thread of the output shaft.
https://www.motorcycle-manual.com/
Slide the rear wheel 2 onto
the output shaft and allow the
gearing to engage by rotating
the wheel.
Install the spacer bushing 1.
Reposition the rear wheel
swinging arm 2 with the
cable 3 for the wheel speed
sensor and the brake hose 4.
Position the rear wheel swing-
ing arm 2, ensuring that the
cable 3 for the wheel speed
sensor is properly routed.
Install the screws 1 and tighten
to the appropriate torque.
10
153
z