BMW C 400 X Rider's Manual page 70

4
68
Briefly press the top of
the MENU rocker button 1
repeatedly until SETUP
z
ENTER 3 is displayed.
Press and hold the top of the
MENU rocker button 1 to start
SETUP.
SETUP ASC is displayed.
Briefly press the top of the
MENU rocker button 1 repeat-
edly to select the following pa-
rameters in SETUP:
Switch ASC off or on ASC OFF/
ASC ON or calibrate ASC
ASC CAL
with anti-theft alarm system
(DWA)
Automatically activate the alarm
function of the anti-theft alarm
system after switching off the
ignition DWA ON or leave deacti-
vated DWA OFF.
Set time display CLOCK.
Set date DATE.
Adjust the brightness of the
backlighting for the instrument
cluster BRIGHT.
Adjust the units UNIT.
Reset the displays RESET.
Exit SETUP EXIT.
Exiting SETUP
Requirement
There are 4 ways to exit SETUP.
https://www.motorcycle-manual.com/
OE
Press and hold the top of the
MENU rocker button 1.
SETUP ENTER is displayed.
Alternative: Briefly press the
top of the MENU rocker but-
ton 1 repeatedly until SETUP
EXIT is displayed.
Press and hold the bottom of
the MENU rocker button 2.
SETUP ENTER is displayed.
Alternative: turn the ignition off
and on again.
SETUP ENTER is displayed.
Alternative: Ride off.