BMW C 400 X Rider's Manual page 55

preferably an authorized
BMW Motorrad Retailer.
Side stand monitoring
faulty
Side stand monitoring
faulty To avoid
breakdown do not stop
engine. Have checked by
spec. workshp.
Possible cause:
The side-stand switch or its
wiring is damaged.
Contact an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis not
completed
ABS indicator light flashes.
https://www.motorcycle-manual.com/
Possible cause:
The self-diagnosis routine was
not completed; the ABS func-
tion is not available. The Scooter
must reach a speed of at least
3 mph (5 km/h) before ABS self-
diagnosis can be completed.
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.
ABS fault
ABS indicator light lights
up.
Limited ABS avail-
ability! Onward jour-
ney possible. Ride care-
fully to next specialist
workshop.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is limited.
It remains possible to continue
riding. Observe additional in-
formation on special situations
which can lead to ABS fault
messages ( 133).
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
ABS failure
ABS indicator light lights
up.
ABS failure! Onward
journey possible.
Ride carefully to next
specialist workshop.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available.
It is possible to continue rid-
ing if you make allowance for
the failed ABS function. You
3
53
z