Advertisement
1. How to change the rack from a Passenger side to Driver
side loading.
1
2. Using the supplied tool hold the insert and unscrew.
2
3. Using an Allen Key remove the two bolts holding the
ratchet arm assembly on.
3
4. Using an Allen Key remove the limiter bolt. Set ratchet
arm assembly aside.
4
PRODUCT: 64705 Race Ready
Installation Instructions
5. Remove the two Allen bolts holding on the wheel cage.
Note: Do not lose the nuts on the backside.
5
6. Remove the Wheel cage.
6
7. Remove plastic spacer.
7
8. Remove the two wheel cage holders.
8
Advertisement
