Geeetech DP200 User Manual page 11

Shenzhen Getech Technology Co.,Ltd
After the slicing completed, click the "Print" button on the right, and then the
machine will automatically start printing, as shown in Picture (5-11). Current resin
parameter configuration and total model layers can also be viewed below. If the resin
is not enough to complete model printing or you want to check that the model is
glued to the printing platform, Click the "pause "button, as shown in picture (5-12),
(5-13). You can slowly replenish the resin into the resin box or observe the model
directly.
(Picture5-9) (Picture5-10)
(Picture5-11) (Picture5-12)
11