Geeetech DP200 User Manual page 12

Shenzhen Getech Technology Co.,Ltd
(Picture5-13)
2)
USB model interface: If there is no model in the print interface. You need to
insert the USB into the USB port on the back of the machine. Click the "USB"
icon to enter the USB interface and select the model file to be loaded. The
printer shows whether to create a New file, click "Yes" to load the model in USB
into the printer internal storage (Note: the loading time depends on the
complexity of the imported STL model), so that you can load the STL file in the
internal storage even after unplugging USB. See picture (5-14) ~ (5-17).
(Picture5-14) (Picture5-15)
12