Festo CPX-FB13 Electronic Manual page 8

Contents and general instructions
Designated use
Target group
Service
VI
The field bus node type CPX−FB13 described in this manual
has been designed exclusively for use as a slave on the
PROFIBUS−DP.
The CPX terminal may only be used as follows:
as designated in industrial applications
without any modifications by the user Only the conver
sions or modifications described in the documentation
supplied with the product are permitted.
in faultless technical condition.
The maximum values specified for pressures, temperatures,
electrical data, torques etc. must be observed.
If additional commercially−available components such as sen
sors and actuators are connected, the specified limits for
pressures, temperatures, electrical data, torques, etc. must
not be exceeded.
Please comply with national and local safety laws and regula
tions.
This manual is intended exclusively for technicians trained in
control and automation technology, who have experience in
installing, commissioning, programming and diagnosing
slaves on the PROFIBUS−DP.
Please consult your local Festo repair service if you have any
technical problems.
Festo P.BE−CPX−FB13−EN en 0503b