Motherboard Features - Supermicro X10DRT-L User Manual

Motherboard Features

CPU
Memory
Chipset
Expansion
Slot
Graphics
Network
I/O Devices
•
Dual Intel E5-2600v3/v4 Series processors (Socket
®
R3-LGA 2011); each processor supports dual full-
width Intel QuickPath Interconnect (QPI) links (of up
to 9.6 GT/s one direction per QPI)
Note 1: Both CPUs need to be installed for full
access to the PCI-E slots, DIMM slots, and on-
board controllers. Refer to the block diagram on
page 1-10 to determine which slots or devices
may be affected.
Note 2: E5-2600v4 requires Revision 2.0 BIOS
(or higher).
•
Integrated memory controller supports up to
1024 GB Load Reduced (LRDIMM) or up to 256
GB Registered (RDIMM) DDR4 (288-pin) ECC
2400/2133/1866/1600 MHz modules in 8 slots
Note 1: Memory speed support depends on the
processors used in the system.
Note 2: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM Sizes
•
DIMM Up to 128GB @ 1.2V
•
Intel PCH C612
®
•
One (1) PCI-Express 3.0 x16 slot (CPU1 Slot1)
•
Graphics controller via ASpeed 2400 BMC
•
Intel i350 Gigabit (10/100/1000 Mb/s) Ethernet con-
troller for LAN 1/LAN 2 ports
•
ASpeed AST 2400 Baseboard Controller (BMC) sup-
ports IPMI 2.0
SATA/sSATA Connections
•
SATA 3.0
1-7
Chapter 1: Overview
Six (6) SATA 3.0 ports supported
by Intel PCH (I-SATA 0-5)