System
Management
Dimensions
Note 1: The CPU maximum thermal design power (TDP) is subject to
chassis and heatsink cooling restrictions. For proper thermal management,
please check the chassis and heatsink specifications for proper CPU TDP
sizing.
Note 2: For IPMI configuration instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
Note 3: It is strongly recommended that you change BMC log-in informa-
tion upon initial system power-on. The manufacture default username is
ADMIN and the password is ADMIN. For proper BMC configuration, please
refer to http://www.supermicro.com/products/info/files/IPMI/Best_Practices_
BMC_Security.pdf
•
Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to
145W (See Note 1 below.)
Fan Control
•
Fan status monitoring via IPMI connections
•
Single cooling zone
•
Multi-speed fan control via onboard BMC
•
Pulse Width Modulation (PWM) fan control
•
PECI (Platform Environment Control Interface) 2.0
support
•
UID (Unit Identification)/Remote UID
•
Trusted Platform Module (TPM) support
•
System resource alert via SuperDoctor 5
•
SuperDoctor® 5, Watch Dog, NMI
•
6.50" (L) x 16.64" (W) (165.10 mm x 422.66 mm)
1-9
Chapter 1: Overview