Special Features; System Health Monitoring - Supermicro X10DRT-L User Manual

X10DRT-L/LIBQ/LIBF Motherboard User's Manual
1-3

Special Features

Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will
respond when AC power is lost and then restored to the system. You can choose
for the system to remain powered off (in which case you must press the power
switch to turn it back on) or for it to automatically return to the power-on state. See
the Advanced BIOS Setup section for this setting. The default setting is Last State.
1-4

System Health Monitoring

This section describes the features of system health monitoring of the motherboard.
This motherboard has an onboard Baseboard Management Controller (BMC) that
supports system health monitoring. An onboard voltage monitor will scan the follow-
ing onboard voltages continuously: 1.2V, +3.3V, 3.3V standby, +5V, +5V standby,
+12V, CPU core, memory, chipset, BMC, PCH, and battery voltages. Once a voltage
becomes unstable, a warning is given or an error message is sent to the screen. The
user can adjust the voltage thresholds to define the sensitivity of the voltage monitor.
Fan Status Monitor with Firmware Control
System health monitoring support provided by the BMC controller can check the
RPM status of a cooling fan. The onboard CPU and chassis fans are controlled by
IPMI Thermal Management.
Environmental Temperature Control
System health sensors in the BMC monitors temperatures and voltage settings of
onboard processors and the system in real time via the IPMI interface. Whenever
the temperature of the CPU or the system exceeds a user-defined threshold, system/
CPU cooling fans will be turned on to prevent the CPU or system from overheating.
Note: To avoid possible system overheating, please be sure to provide
adequate airflow to your system.
System Resource Alert
This feature is available when used with SuperDoctor 5. SuperDoctor 5 is used
to notify the user of certain system events. For example, you can configure
SuperDoctor 5 to warn you when the system temperature, CPU temperatures,
voltages, or fan speeds go beyond a predefined range.
1-12