Dip Switch Location; Dip Switch Settings - Infinite Peripherals DPP-250 User Manual

DPP-250 User Manual

DIP Switch Location

1. To locate the DIP switch settings, turn the printer to
the back side, and then press down on the battery cover
latch.
2. To remove the battery cover, lift it upwards.
3. Remove the battery.
4. Turn the desired switch On or Off, as needed.

DIP Switch Settings

With the different methods of communication designed
in the DPP-250, ensure the DIP switches remain as the
factory default, unless required for change. Two different
operational modes, which detect current conditions
differently, and are determined by the SW2 switch:
• Continuous Paper Mode
• Black Mark Mode — Determines the proper alignment
for the starting print position on indexed media with
printed data.
Switch Off
SW1 Enable Bluetooth
SW2 Continuous Paper
Mode
SW3
None
SW4 Normal operation
mode
On
Disable Bluetooth
Black Mark Mode
Xon / Xoff protocol
Protocol mode
12