Charging Your Dpp-250; Led Status; Charging Led Status - Infinite Peripherals DPP-250 User Manual

DPP-250 User Manual

Charging Your DPP-250

Before operating the DPP-250 printer, install the Lithium Ion rechargeable
battery. Ensure the battery pack is charged for at least 4 hours.
Note
Ensure the input cord is connected to the AC adapter before charging the
battery.
To prevent electrical damage to your printer and/or battery pack, only use
the approved AC charger provided with the printer.
1. Pull the DC jack port tab backwards.
2. Insert the AC adapter into the port.
3. Introduce the AC adapter plug into an appropriate power outlet to
begin charging.
Note
LED status during charging is displayed.

LED Status

After the initial battery charge is completed, you can monitor the battery status, as needed. If the operating time of a fully charged
battery is too short, you may need to replace the battery.

Charging LED Status

Battery LED indicators display the modes of operation such as connection status and charging and/or low battery conditions.
Color LED Status
Paper is out or stopped printing.
Solid Red
Printer head is over heating.
Flashes Red
Battery charging complete.
Solid Green
Power is on.
Battery is low.
Flashes Green
Bluetooth paired.
Flashes Blue
Action
Turns green once paper is replaced.
Turn off printer.
N/A
Charge battery.
N/A
10