Table of Contents
Advertisement
Must be purchased separately.
GROUNDING CLAMP 103538
GROUND WIRE 208950
25 ft (7.6 m) long,
12 gauge (1.5 mm@)
BLEED-TYPE MASTER AIR VALVE
300 psi (21 bar) MAXIMUM WORKING PRESSURE
107142 1/2 npt(m) inlet x 1/2 npt(f) outlet
Relieves air trapped in the
air line between the pump
air inlet and this valve when
closed.
AIR LINE FILTER
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
106149 1/2 npt(f)
inlet and outlet
AIR LINE LUBRICATOR
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
214848 8 oz (0.24 liter)
bowl capacity. 1/2
npt(f) inlet and outlet
AIR LINE FILTER AND REGULATOR 202660
180 psi (13 bar) MAXIMUM WORKING PRESSURE
To regulate and filter compressed
air supply to the gun. Includes
gauge and two 1/4 npt(m) outlet
valves, 50 micron filter element
with 100 mesh inlet strainer. 1/2
npt(f) inlet. Flow rate is over 50
scfm (1.4 m#/min).
16
307026
Accessories
AIR REGULATOR AND GAUGE
300 psi (21 bar) MAXIMUM WORKING PRESSURE
FLUID DRAIN VALVE
500 psi (35 bar) MAXIMUM WORKING PRESSURE
Relieves fluid pressure in the hose and gun.
208630 1/2 npt(m) x 3/8 npt(f); for
non-corrosive fluids; carbon steel
and PTFE
210071 3/8 npt(m) x 3/8 npt(f); for
corrosive fluids; stainless steel
and PTFE
FLUID PRESSURE REGULATOR
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
Use on circulating line drops to regulate fluid pressure
to each air spray gun or dispensing valve. 3/8 npsm(f)
inlet; 3/8 npsm(m) and 3/8 npt(f) outlets.
203831 Carbon steel; 0-60 psi (0-4 bar) regulated fluid
pressure range; 2 gpm (7.6 liter/min) maximum flow
rate
209030 Stainless steel; 5-100 psi (0.4-7 bar) regulated
fluid pressure range; 3 gpm (11.3 liter/min) maximum
flow rate
203831 Carbon steel; 0-60 psi
(0-4 bar) regulated fluid pres-
sure range; 2 gpm (7.6 liter/min)
maximum flow rate
209030 Stainless steel; 5-100
psi (0.4-7 bar) regulated fluid
pressure range; 3 gpm (11.3
liter/min) maximum flow rate
01355
202156 0-200 psi (0-14 bar)
Regulated Pressure Range;
3/8 npt(f) inlet and outlet.
01356
Advertisement
Table of Contents
