Lamp Holder Dismantling; Troubleshooting; Electrical Appliance Faults - Midea A24MABOF50 Installation And Service Manual

6.8 Lamp Holder Dismantling

Tool: M14 hex small wrench
Step: as the above step, open the terminal box cover, pull out the terminal of lamp holder and control
box assembly, loosen the hex nut at the end of lamp holder with M14 hex small wrench, then
take out the lam holder and lampshade from the side groove, as shown in the picture.
Loosen the hex nut at the
end of lam holder

7 Troubleshooting

7.1 Electrical Appliance Faults

- -
10
Lamp holder and lampshade
dismantling are completed.