Extron electronics AXP 50 C AT Setup Manual page 4

AXP 50 C AT • Setup Guide (Continued)
Dante Controller for Windows and DSP Configurator Software Installation
There are no hardware controls for the AXP 50 C AT. Dante Controller from Audinate is required to select and route digital inputs
and outputs to connected Dante-compatible devices. DSP Configurator is used for configuration.
Install DSP Configurator and Dante Controller on a PC running Microsoft
requirements, see the product page on the Extron website. Dante Controller must be installed to rename the connected
AXP 50 C AT to assist identification on the network.
Dante Controller for Windows Download
Both software applications are available from the Extron Electronics web page at www.extron.com.
From the Extron Electronics web page at www.extron.com, enter AXP 50 C AT in the search field and press <Enter>.
1.
The AXP 50 C AT product page opens.
AXP 50 C AT Product Page
Figure 4.
2
Click Downloads (
2.
Click Dante Controller (
3.
3 3
The Download Center page opens.
4 4
5 5
Download Center - Dante Download
Figure 5.
Fill in the required fields.
4.
4
2 2
). The Downloads panel opens. Dante Controller and DSP Configurator are listed.
3 ).
2 2
Windows 7 or newer. For full details about computer
® ® ®
1 1
AXP 50 C AT
1 1